Everpure MRS-100 EV9970-07 Reverse Osmosis System

Everpure MRS-100 EV9970-07 Reverse Osmosis System

US$1,500.00

Contact us for information on the Everpure MRS-100 EV9970-07 Reverse Osmosis System for mineral reduction in foodservice applications.

Quantity:
Add To Cart

Product Description

Everpure MRS-100 EV9970-07 Reverse Osmosis System features:

  • Part Number: EV9970-07 

  • Mineral Reduction System for foodservice applications 

  • Capacity: 100 gpd 

  • Ideal for:

    • Flash steamers 

    • Conventional steamers 

    • Cheese melters 

    • Combi-ovens 

    • Coffee/espresso machines 

  • Improves equipment life and performance by removing at least 90%+ of all dissolved solids that cause scale build-up 

  • Guards against taste and odor causing contaminants while removing dirt, particulates and dissolved minerals that can adversely affect taste of water and beverages 

  • Sanitary cartridge replacement is simple, quick and clean. Internal filter parts are never exposed to handling or contamination

MRS-100 RO System

Operation Tips

  • Change filter cartridges on a regular 6-month preventative maintenance program

  • Change RO cartridges on a regular 2-year preventative maintenance program

  • Change cartridges when capacity is reached

  • Always flush the filter cartridge at time of installation and cartridge change

  • Proper pre-treatment is required to control RO Cartridge (membrane) scale formation and/or fouling

    • Raw water hardness in excess of 7 grains per gallon should be softened

    • The raw water may contain particulates and the use of a pre-filter is recommended

  • Contact EVERPURE Technical Service for pre-treatment recommendations

Installation Tips

  • Choose a mounting location suitable to support the full weight of the system when operating

  • Deliming of equipment prior to application is recommended

  • Never use saddle valve for connection 

  • Use 3/8” (10 mm) water line

  • The water inlet must supply a minimum of 0.7 gpm (2.7 lpm)

  • Install vertically with cartridge hanging down and allow 2 inches above and below unit for cover removal and service access

  • Allow clearance to right of unit for optional prefilter

  • Refer to Installation, Operation & Maintenance Manual for cartridge flushing and RO start-up